No Shop Currency defined! Contact the administrator, if you are one go to https://www.line-magnetic.eu/administrator/index.php?option=com_virtuemart&view=user&task=editshop

LM-210iA Integrated tube amplifier - Single Ended 300B - 2x8W

The LM-210IA amplifier uses tri-tube 300B tubes mounted in single-ended and operating in pure Class A. It delivers a power of 2x8W.



The integrated amplifier LM-210IA is a Single Ended amplifier with 2x 300B tubes in Class A amplification and delivers 2x8W.

Output transformers are oversized. Listening, the magic of the 300B is total both in the richness of the timbres and the subtlety of the sound scene. The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability.

Its transformers output are of EI type, specially disigned for power supply. 4 pairs of input and speaker terminals for 4, 8 or 16 ohm speakers are located on the back panel. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.

- Single ended design
- Class A amplifier
- Point-to-point wiring
- High quality components

Input stage: 2x 12AX7
Drivers: 2x 310A
Rectifier: 2x 5U4G
Power stage: 2x 300B; Single Ended design, Pure Class A 

Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Backlight on/off selector: Turns the meter light on or off.
NFB selector min / max: Adjustment of the feedback level.
Integrated / Pre-in selector: Switch from built-in preamplifier to external.
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.  

Metal and removable tube guard cage
Infrared Remote control


Class A amplifier de 2x8W RMS
THD : 1% (1kHz)
Signal/Noise ratio: 88dB (Weighted A)
Frequency response: 15 à 35.000 Hz (-1.5 dB)
Sensitivity: 400 mV (Built-in Mode) 1000 mV (Pré-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω

3x Line inputs RCA(paire)
1x Pré-in input
2x Screw terminals compatible with banana plugs

Included Accessories

2x Fuses
1x Remote control
1x Detachable power cord
1x Manual

Tubes Basics               Tubes remplacements
12AX7                          12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
310A                            WE310A
300B                            300B, 300A, 4300B
5U4G                            5R4GY, U52, CV1071, 5V3


Dimensions (L x H x P): 480 x 530 x 320 mm
Weight: 32 Kg

Finish: Silver